Minwax wood hardener vs pc petrifier

Minwax and Petri are both wood stain products. Minwax has a higher amount of oil added to the stain to build up the natural look. Petri has more natural ingredients to give it a more fresh, natural look. To top it off, Petri has a lower price, so if you’re building a natural look, go for Petri. If you’d like a darker stain to make the wood look richer, go for Minwax.

What’s the Difference Between PCPetri & MinWax Wood Hardeners?

Minwax – water-based stains are easier to maintain, keep clean, and are less likely to cause stains or damage to clothing. They have a longer shelf-life than oil-based stains and work well on a range of surfaces. Oil-based stains penetrate the material better than water-based stains and can provide stronger protection against fading from sunlight and water damage. Oil-based stains are not as easy to clean up as water-based ones. Oil-based stain can get on carpets, clothing and skin easily. If you spill any of it you can easily wipe it away with a towel.

PCPETRI: This product contains no waxes or oils that can be absorbed by your furniture. It dries quickly with an even color distribution. The finish will not crack, peel, flake or fade over time.

MINWAX WOOD HARDENER: This product contains high levels of waxes and oils that absorb into the surface of the wood. These materials create a protective barrier on the surface of the wood that prevents moisture from penetrating deep within the grain. Over time this layer may wear away leaving exposed areas in the wood where water can penetrate causing damage to the wood. 

Both are ways to prevent wood from degrading. One of the major differences is that Minwax is water soluble and thus more easily cleaned of debris (dust, dirt, etc.) than Petri. PCPetri is only water soluble in full strength and in an ideal environment with perfect temperature and humidity levels. If you’re going to use Minwax, I’d recommend that you look up the safety procedures and testing on it–it’s quite a bit different from Petri since it’s water soluble.

How do they compare when used as stains?

I’ve never tried them side-by-side but here’s my take based on personal experience using each one:

1) They dry very differently. With Petri, there was almost zero drying time at all. You could walk out of the room after applying it and come back hours later and still have some wetness left. With Minwax, however, it took several days before any noticeable change occurred.

2) When applied correctly, they leave a similar appearance. Both were easy to apply evenly and gave me good coverage. However, once dried, they looked completely different. While Petri had a nice sheen, Minwax just seemed flat.

3) In terms of longevity, I found that Petri lasted much longer than Minwax. After two years, most of the Minwax remained while the Petri had mostly worn down.

How to use minwax wood hardner?

You need to mix equal parts of Minwax Hardwood Stain and Minwax Polyurethane Primer together. Then add enough water until the mixture reaches the consistency of thick paint. Apply the mixture onto the area you want stained. Let sit overnight then wipe clean.

Best Wood Hardeners:

Great Penetration

The best wood hardeners are those that penetrate the surface to reach deep into the pores of your wood. This will help prevent future rot from forming in these areas. The best wood hardener should also be able to withstand high temperatures without burning or cracking. It’s important to note that some types of wood can burn at higher temperatures than others, but all woods have different tolerances when exposed to heat.

Long Lasting Results

Wood hardening products come with varying degrees of effectiveness. Some work great for short term projects like furniture making, while other products last forever if properly maintained. A quality wood hardener will provide long lasting results because it penetrates deeply into the wood fibers creating a strong bond between the stain and the wood. Wood hardeners are available in both oil and water base formulas which makes application easier and allows for better penetration. Oil based products tend to give off fumes so make sure to ventilate well during application. Water based products don’t emit fumes and are less likely to cause staining problems.

Minwax Hardwood Stains

Minwax offers many different finishes including stains, polymers, sealers, varnishes, shellacs, etc. All of their products are made by hand and contain no harmful chemicals. Their stains include colors such as black walnut, cherry, mahogany, maple, oak, pine, red cedar, teak, white ash, yellow birch, and more! These stains are designed specifically for outdoor applications and are safe for use around children and pets.


The Minwax high performance wood hardner has been around for years, but it still remains one of the most popular products on the market today. It comes in two different formulas: regular formula and premium formula. The regular formula can be used with any type of wood including pine, fir, cedar, oak, mahogany, etc., while the premium formula works only with maple or birch plywood.


Possibly the easiest way is to use a rotten wood hardener. Problem: This item doesn’t offer an extraordinary measure of security. In spite of the fact that it does make your wood harder than ever before, it won’t shield it completely from harm. You will need to apply another layer of protection if you wish to ensure that your new wood looks great all through the years.

Minwax high performance wood hardener is made utilizing 100% natural components, making it safe for both kids and pets.

Why Do You Need a Wood Hardener?

Wood is one of the most beautiful materials in existence. It’s also very durable, but it can be damaged by water or other elements over time. If you have wood furniture that has been exposed to moisture for an extended period of time, then your wooden pieces may need some help restoring their original beauty. A good way to protect your wood from damage caused by exposure to humidity is through the use of a wood hardener.

The Drying Time of the Liquid Wood Hardener

If you want to use the product immediately after application, then you should choose one that dries within an hour. If you plan to wait several days before applying the hardener, then you’ll probably find yourself waiting longer. Some products dry faster than others, but all take at least 24 hours to fully cure.

Durability of the Product

You should consider how long the product lasts when choosing which type of wood hardener to buy. For example, if you’re planning to paint your piece soon, then you might not want to purchase something that’s going to wear out quickly. On the flip side, if you intend to leave your wood alone for months or even years, then you’ll definitely want to go with a product that will last much longer.

How To Apply Your Wood Hardener

You must first clean the surface of your wood thoroughly using soap and warm water. Then, let the wood air-dry until it reaches room temperature. Once this step is complete, you can begin applying the liquid hardener. Make sure that you follow the manufacturer’s instructions carefully so that you don’t end up damaging your wood.

What Are the Benefits of Using a Wood Hardener? There are many benefits associated with using a wood hardener. One benefit is that they prevent wood from absorbing too much moisture. Another advantage is that they keep wood looking its best for decades.

DMCA.com Protection Status